QUALITY & CERTIFICATIONS · CERTIFICATE LIBRARY
Certifications with numbers, scope and scans — not badges.
Every certification below states its number, its exact scope and its validity. Read the scope carefully: it tells you precisely which products each certificate covers. That is what your inspector will check — so we put it on the page first.
§01 — Management systems
ISO 9001 / 14001 / 45001 — valid to 2027-12-26.
| System | Certificate No. | Scope | Issued / Valid to |
|---|---|---|---|
| ISO 9001:2015 Quality | 102424Q0135R0S | Production of wire & cable within registered qualification scope | 2024-12-27 / 2027-12-26 |
| ISO 14001 Environmental | 102424E0136R0S | Same scope | 2024-12-27 / 2027-12-26 |
| ISO 45001 Occupational H&S | 102424S0137R0S | Same scope | 2024-12-27 / 2027-12-26 |
How to check a Chinese certificate
All three certificates are verifiable on the China National Certification and Accreditation Administration (CNCA) website at cnca.gov.cn using the certificate numbers above. We encourage buyers to verify before ordering.
Issuing body: CSIC Inspection Co., Ltd. (中理检验有限公司).
§02 — Product certification (CCC)
CCC covers our building wire range — and only that range.
China Compulsory Certification applies to specific product categories. Ours covers the 60227 IEC series PVC-insulated building wires and flexible cords. It does not extend to power cables or medium-voltage cables — any supplier claiming blanket “CCC certified cable” for MV products is misrepresenting the system.
| Certificate | No. | Covered products | Valid to |
|---|---|---|---|
| CCC 752 | 2014010105747252 | 60227 IEC 52 (RVV), 60227 IEC 53 (RVV), RVS flexible cords | 2028-12-04 |
| CCC 753 | 2014010105747253 | 60227 IEC 01 (BV), 02 (RV), 06 (RV), BVR building wires | 2028-12-04 |
§03 — Type test evidence
A complete third-party type test, values published.
| Item | Detail |
|---|---|
| Report No. | 202521001018 |
| Product | WDZC-KYJY 450/750 V 37×1.5 LSZH control cable |
| Standard | GB/T 9330-2020 (+ IEC 60332-3C / 61034 / 60754) |
| Lab | Qingdao Product Quality Testing Research Institute · CNAS L1184 |
| Key results | Smoke 80 % (req ≥ 60 %) · bunched flame C char 0.6 m (limit 2.5 m) · DC resistance 11.5 Ω/km (limit 12.1) · 3000 V/5 min no breakdown |
§04 — How we test, drum by drum
Routine, sample and type tests — the three layers.
Every drum, no exceptions
Conductor DC resistance, voltage withstand, sheath spark test, metallic screen check, construction dimensions, marking. The routine report travels with the drum.
Every production batch
Partial discharge (MV), insulation thickness & eccentricity, armour coverage, mechanical properties of insulation and sheath.
Every new construction
Bending + voltage, load cycling, impulse voltage — witnessed by CNAS-accredited third-party labs before a construction enters production.
§05 — Third-party inspection
Send your inspector — we will open the floor.
SGS, Bureau Veritas, TÜV, Intertek and CCIC inspections are routine for our export orders. Pre-shipment inspection typically covers construction verification against the PO, routine electrical tests, marking and drum condition. Factory audits are welcome with two weeks’ notice.